Title Tutorial

In my video project, I had 35 different title “slides”. These are useful because you can overlay text in order to give the viewer more information about what’s going on. For my video, I used it to tell the viewer what type of animal was on screen at that time.

To start with, you open up the project that you’re going to add a title on. Then you click on the “Title” tab on the sequence box. On this screen, you click the film icon with a “T” on it, this creates a new title.

Screen 1

Creating the new title opens up this box where you can change specifics about the title card. Here you can name the title whatever you want. The name doesn’t really matter, just something so that you remember what title card says what.

Screen 2

Once you hit “OK”, it goes back to the sequence. But now you can click anywhere on your video to add text. After you’ve typed what you want to display, there is all sorts of properties you can change over on the right. For example you can change the font, size, or color of the text. You can also readjust where the words are positioned on the screen.

 

Screen 3

When you’re satisfied with your title card, you drag it onto the video timeline from the source box just like any video or sound clip. It’s possible to adjust how long the title card is on the screen just like adjusting the length of a clip.

That’s all there is to overlaying words on a video in Premier CC.

Tutorial: Adjusting the volume of a clip

For my tutorial I will be focusing on how to increase or decrease the volume of a specific clip.

  1. Import a video to Premiere and insert a clip from that video into the timeline.Screen Shot 2016-02-03 at 1.13.24 PM

2. Double click on the clip you are trying to work with so that the clip shows up in the top left corner on the window,

Screen Shot 2016-02-03 at 1.14.29 PM

3. Click on the “Clip” button at the navigation bar at the top of the screen. Then select “Audio Options”, then click on “Audio Gain”.

Screen Shot 2016-02-03 at 1.16.11 PM4. Either check “set gain to” to choose how loud you want the clip to be, or check “adjust gain by” to increase or decrease the volume by a certain amount. To make the clip louder make the number larger, to make the clip quieter, use negative numbers. Then click “ok” and your clip’s volume will be adjusted.

Screen Shot 2016-02-03 at 1.17.24 PM

How To Reverse Clips

Premiere Pro has a lot of interesting features to edit video clips with. One of those features is the Speed and Duration setting that you can use to play around with the speed, duration, and direction of your clip. Here is a tutorial on how to use this setting to reverse the direction of your clip so that it plays from end to beginning instead of beginning to end.

Step 1. After opening your project in Premiere Pro and importing the video you wish to change the direction of into your project, left-click on the blue box next to the clip file’s name so that it opens  in the editing section of Premiere (the Source box). As an example, I will showing how I changed the direction of the robot legs clip.

tutorial 1

Step 2. Next, direct all your focus onto the editing box where the clip you wish to edit is now selected. Using your mouse, right-click on the video clip preview.

tutorial 2

Step 3. This will open a long dialogue box. Find the option called “Speed/Duration” and left-click on it.

tutorial 3

Step 4. The Speed/Duration settings box will then pop-up and prompt you to make changes to the clip.

tutorial 4

Step 5. Lastly, check the box that says “Reverse Speed” and then click “OK”. Now your clip should play backwards.

tutorial 5

Tutorial: Changing the Speed of a Clip

For my tutorial I chose to focus on something I taught myself while working on the video project, changing the speed of clips. I decided it would be beneficial to not only the message of my project but to the audience as well. There are two capabilities that come with changing the clip speed and duration. One can either slow it down for a “slow motion” effect, or speed it up for a “fast forward” effect. I personally felt that slowing the clip speed would display the football action in a manner that accentuated the immediate affect of the brutal physicality of a tackle.

  1. You must upload your clip to the storyline.
  2. Then you have to select the part of the clip you want to alter the speed.
  3. Once you have the part selected, you left click the clip.
  4. Then you scroll down the list and find “Speed/Duration.”Screen Shot 2016-01-29 at 3.30.15 PM
  5. Once you get into this section you are presented with this screen.Screen Shot 2016-01-29 at 3.30.57 PM
  6. Because the clip is at normal speed is it at “100%.”
  7. To make the speed slower, you can lower the number next to speed.
  8. Click “OK.”
  9. The clip you selected will now have a slow motion effect.

Video Remix Tutorial

How to: Put Text over video in Adobe Premiere Pro

 

Step 1/5:

-Select the video clips that you want for your remix, and put them in the order you desire.

 

Step 2/5:

-On the top of the screen, click on the “Title” Tab.

Then click on “New Title”

Then “Default Still”

 

Step 3/5:

-A screen will prompt you to add your own text. It should look similar to this (see figure below):

From this window you type the text you desire, you can also edit the font, the color, the size and the position. You can also edit at what point of the video you are in so you can see how the color and positioning would look with the video.

-When you are done, just simply click the red x in the top left corner of the prompt screen.

 

Step 4/5:

-Once you make a title, you can find it in the left column in the premiere interface.

You can double click these if you want to go back in and edit the title you already created.

 

Step 5/5:

In order to put them over the video, simply drag them over video segments.

The length of the title can be adjusted by clicking on the pink block and dragging the length. Another method is to drag multiple titles over segments, even if they are the same.

 

Video Tutorial

Premiere Tutorial: Adding video transitions

For my tutorial, I’m going to show you how to add video transitions between video clips in Premiere. It’s really not that difficult, but it was something that didn’t come so easily to me at first when I was doing it, so I thought I would share this trick.

1) Click on the Effect Panel near the top of the screen. It should open up an Effects panel somewhere on your screen. In the screenshot below, the Effects panel opens up to the left of the screen.

tut1

You can see in the Effects Panel that there are a variety of video and audio effects. I have the video transitions tab lengthened, so you can see all of the different types of video transitions.

2) I’ve selected the dissolve tab to pick the transition I want that includes a dissolve of some type. As you can see in the screenshot below, there’s a variety of different transitions you can choose from this dissolve tab. I’ve selected the Dip to Black transition in this screenshot.

tut2

After selecting the transition you want and setting up the video clips you want to place the transition between, all you have to do is drag the transition you selected from the Effects Panel and drop the transition between the to video clips. In the screenshot above, I’ve just dropped a transition between two clips towards the right hand side of the timeline.

3) After dropping the transition effect on the timeline, it should look like the transitions on the timeline in the screenshot below. From here, you should be able to manipulate the transition. You can elongate the transition with the select tool or you can alter the transition’s starting point.

tut3

Switch Between Clips and Keep Your Audio

This video shows how to efficiently switch between clips, but keep your audio going if you want to have a monologue or song overlay different clips. The purpose of this method is to keep your clips in order so that if you need to make changes to ordering or timing you do not lose the clips and have to start a clip from scratch from a source.